|
|
SI3100
- 2 Channel LVDT
Comparator for use with Solartron
LVDT transducers
 
Features
2 LVDT inputs
Simple Menu System
Single channel Display
7 digit Color Display (user selectable)
Analog Display with auto coarse/fine resolution
Auto display colour change for in/out range
Peak hold facility
Discrete I/O for each transducer input
4-20mA or DC output
RS232 output
Front panel IP 65 protection
Description
The New SI3100 Controller is an instrument designed to maximise the
performance of Solartron Metrology’s extensive range of LVDT Gauging
Probes and Displacement Transducers. The instrument features an
intuitive, menu-driven color display which can be programmed to set
limits or alarms and record other parameters. Powered from a 24Vdc
source, the SI3100 can be used to display one or two transducer
readings, computed results from two transducers such as, A, B, A+B, A-B,
(A+B/2), (A-B/2), and computations with constants, e.g. angle
measurements. Full set up is made via the IP65 protected front keypad
that can, if required, be password protected. The SI 3100 also features
discrete inputs/outputs and a selection of Analogue outputs in the form
of 4-20mA or DC voltage.
Product type SI3100 - 2 Channel LVDT
Display type: Color LCD display 40Hz update rate with 30º Viewing Angle
Display length (mm): XX.XXXXX
Display length (inches): X.XXXXXX
Resolution (μm): Down to 0.05 μm or 0.000005”
Analog Display: Color Solid vertical bar
Transducer: LVDT
AC Primary Voltage (VAC rms): 3.0 V RMS
Primary Frequency (kHz): 5kHz or 10kHz
Signal Input (sensitivity range): 55mV to 500mV Full range
Input load resistance (k Ohm): 2k, 10k 100k
External input/output: Serial RS232 serial port (for printer or PC).
Discrete Output:
six isolated discrete outputs (Channel A, Lo, OK, HI), ( Channel B, Lo,
OK, HI)
Analog Output: 2 Channels either configured 4-20mA or DC Voltage
Keypad: Membrane Keypad with 9 keys: Print, Zero, Up, Down Left, Right,
Enter, Peak hold/Track, Menu.
Measurement configurations
Data Logging Not available: Number of transducer inputs 1 or 2 (user selectable)
Measurement type: A, B, A+B, A-B, (A+B)/2, (A-B)/2, (B-A/a)
Indications: Measurement Mode, Type of measurement, Lower and Upper Limits,
Measurement out of Limits
Electrical
Power supply: VDC
+24 VDC +/- 10%
Mechanical and Enviromental
Mounting: Bench Top or Panel mount options
Protection: Front Panel IP65, Case IP51,
Rear Connectors IP51
Weight: 1.1kg
Operating temperature: from 0°C to +50ºC
Storage temperature: between -20ºC to +85ºC
EMC Immunity: EN6100-6-2:2001, Emissions: EN61000-6-3:2001
Dimensions: W x H x D(mm): 134 x 65 x 160 excluding bezel
W x H x D(mm): 144 x 74 x 175 including bezel |
